Description
FMC150
4G
M1
2G
Advanced 4G LTE Cat 1 GPS tracker with integrated CAN data processor
Additional information
| Module | Name: FMC150-QJIB0: Quectel EG915U-EU with Teltonika TM2500 FMC150-QKIB0: Quectel EG915U-LA with Teltonika TM2500 Technology: LTE Cat 1/GSM/GPRS/GNSS/BLUETOOTH |
|---|---|
| GNSS | GNSS: GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS Tracking sensitivity: -165 dBM Receiver: 33 tracking channel 99 acquisition channel Position Accuracy: < 2.5 m CEP Hot start: < 1 s Warm start: < 25 s Cold start: < 35 s |
| Cellular | Technology: LTE Cat 1, GSM 2G bands: FMC150-QJIB0: GSM: B2/B3/B5/B8 FMC150-QKIB0: GSM: B2/B3/B5/B8 4G LTE bands: FMC150-QJIB0: LTE FDD: B1/B3/B7/B8/B20/B28 FMC150-QKIB0: LTE FDD: B2/B3/B4/B5/B7/B8/B28/ B66 Data transfer: LTE: LTE FDD : Max 10Mbps (DL)/Max 5Mbps (UL) LTE TDD: Max 85.6 Mbps (DL)/Max 85.6 Mbps (UL) GSM: GPRS: Max 85.6Kbps (DL)/ Max 85.6Kbps (UL) Data support: SMS (text/data) Power: Input voltage range 10–30 V DC with overvoltage and reverse polarity protection Internal Back-up battery: 170 mAh Li-Ion battery, 3.7 V (0.63 Wh) Power consumption: At 12V < 6mA (Ultra Deep Sleep) At 12V < 8mA (Deep Sleep) At 12V < 11mA (Online Deep Sleep) At 12V < 20mA (GPS Sleep) At 12V < 35 mA (Nominal with no load) At 12V < 250 mA Max. (with full Load / Peak) |
| Bluetooth® | Specification: 4.0 + LE Supported peripherals: Temperature and Humidity sensor, Inateck Barcode Scanner, Universal BLE sensors support |
| Physical specification | Dimensions: 65 x 56,6 x 20,6 mm (L x W x H) Weight: 55 g |
| Operating environment | Operating temperature (without battery): -40 °C to +85 °C Storage temperature (without battery): -40 °C to +85 °C Operating humidity: 5% to 95% non-condensing Ingress Protection Rating: IP41 Battery charge temperature: 0 °C to +45 °C Battery discharge temperature: -20 °C to +60 °C Battery storage temperature: -20 °C to +45 °C for 1 month -20 °C to +35 °C for 6 months |
| Interface | Digital Inputs: FMC150-QJIB0: 3 FMC150-QKIB0: 2 Negative Inputs: FMC150-QJIB0: 1 (Digital Input 2) FMC150-QKIB0: – Impuls Inputs: FMC150-QJIB0: 2 (Digital Input 1, Digital Input 2) FMC150-QKIB0: 1 (Digital Input 1) Analog Inputs: FMC150-QJIB0: 2 FMC150-QKIB0: 1 Digital Outputs: FMC150-QJIB0: 2 FMC150-QKIB0: 3 CAN interfaces: 2 1-Wire: 1 GNSS antenna: Internal High Gain Cellular antenna: Internal GSM High Gain USB: 2.0 Micro-USB LED indication: 3 SIM: Micro-SIM or eSIM Memory: 128MB internal flash memory |
| Features | CAN Data: Fuel Level (Dashboard), Total fuel consumption, Vehicle speed (wheel), Vehicle driven distance, Engine speed (RPM), Accelerator pedal position Sensors: Accelerometer Scenarios: Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip Sleep modes: GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep Configuration and firmware update: FOTA WEB, FOTA, Teltonika Configurator SMS: Configuration, Events, DOUT control, Debug GPRS commands: Configuration, DOUT control, Debug Time Synchronization: GNSS, NITZ, NTP Ignition detection: Digital Input 1, Accelerometer, External Power Voltage, Engine RPM |
| Certification & approvals | Regulatory: CE/RED, E-Mark, RCM, RoHS, REACH |
Only logged in customers who have purchased this product may leave a review.
General Enquiries
There are no enquiries yet.
Reviews
There are no reviews yet.